80d www.vishay.com vishay sprague revision: 29-aug-11 1 document number: 42060 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 aluminum capacitors + 85 c, snap-in features ? general purpose ? polarized aluminum electrolytic capacitors, non-solid electrolyte ? high ripple capability ? compliant to rohs directive 2002/95/ec quick reference data description value nominal case size ? d x l in inches (mm) 1.38 x 3.15 (35.0 x 80.0) operating temperature - 40 c to + 85 c rated capacitance range, cr 82 f to 56 000 f tolerance on cr - 10 %, + 30 % rated voltage range, ur 6.3 wv dc to 250 wv dc termination snap mount life validation test 2000 h at 85 c ? cap ? 15 % from initial measurement. ? esr ? 1.5 x initial specified limit. ? dcl ? initial specified limit shelf life 500 h at 85 c ? cap ? 15 % from initial measurement. ? esr ? 1.3 x initial specified limit. ? dcl ? 2 x initial specified limit dc leakage current i = k k = 4.0 at + 25 c i in a, c in f, v in volts cv ripple current multipliers temperature ambient temperature multipliers - 55 c - 65 c - 75 c - 85 c 2.0 1.7 1.4 1.0 frequency (hz) wv dc 50 to 60 300 to 1000 1000 and up 0 to 49 50 to 199 200 to 250 0.85 0.83 0.80 1.10 1.15 1.30 1.15 1.20 1.40 esl (typical values at 1 mhz to 10 mhz) nominal diameter 0.984 (25.0) 1.18 (30.0) 1.38 (35.0) typical esl (nh) 8.0 10.0 12.0 dimensions in inches (millimeters) case code diameter length case code diameter length d + 0.039 - 0 (+ 1.0/- 0) l 0.079 (2.0) d + 0.039/- 0 (+ 1.0/- 0) l 0.079 (2.0) ja 1.00 (25.0) 1.00 (25.0) kd 1.18 (30.0) 1.57 (40.0) jb 1.00 (25.0) 1.18 (30.0) ke 1.18 (30.0) 2.00 (50.0) jc 1.00 (25.0) 1.38 (35.0) mb 1.38 (35.0) 1.18 (30.0) jd 1.00 (25.0) 1.57 (40.0) mc 1.38 (35.0) 1.38 (35.0) je 1.00 (25.0) 2.00 (50.0) md 1.38 (35.0) 1.57 (40.0) ka 1.18 (30.0) 1.00 (25.0) me 1.38 (35.0) 2.00 (50.0) kb 1.18 (30.0) 1.18 (30.0) mf 1.38 (35.0) 2.50 (63.0) kc 1.18 (30.0) 1.38 (35.0) mg 1.38 (35.0) 3.18 (80.0)
80d www.vishay.com vishay sprague revision: 29-aug-11 2 document number: 42060 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering example electrolytic capacitor 80d series: 80d122p200me2de3 dimensional and available forms description code explanation 80d product type 122 capacitance value (1200 f) p tolerance (p = - 10 %/+ 30 %) 200 voltage rating at 85 c (200 v) me can size (see dimensions table) 2 pvc insulating sleeve d terminal style (d = 2 pin snap-in) e3 rohs compliant electrical data and ordering information capacitance (f) part number nominal case size d x l max. esr (m ? ) max. ripple at + 85 c (a) 120 hz 10 khz to 40 khz 120 hz 10 khz to 40 khz 16 wv dc at + 85 c, surge = 20 v 8200.0 80d822p016jb2de3 0.984 x 1.18 (25.0 x 30.0) 73.0 65.0 3.3 3.6 8200.0 80d822p016ka2de3 1.18 x 0.984 (30.0 x 25.0) 91.0 84.0 2.8 3.0 10 000.0 80d103p016jc2de3 0.984 x 1.38 (25.0 x 35.0) 59.0 53.0 3.9 4.2 15 000.0 80d153p016je2de3 0.984 x 1.97 (25.0 x 50.0) 37.0 33.0 5.6 6.0 22 000.0 80d223p016ke2de3 1.18 x 1.97 (30.0 x 50.0) 35.0 32.0 5.8 6.1 33 000.0 80d333p016me2de3 1.38 x 1.97 (35.0 x 50.0) 19.0 17.0 9.4 10.0 25 wv dc at + 85 c, surge = 30 v 4700.0 80d472p025jb2de3 0.984 x 1.18 (25.0 x 30.0) 76.0 65.0 3.2 3.6 6800.0 80d682p025kb2de3 1.18 x 1.18 (30.0 x 30.0) 71.0 63.0 3.4 3.6 10 000.0 80d103p025je2de3 0.984 x 1.97 (25.0 x 50.0) 39.0 33.0 5.4 6.0 10 000.0 80d103p025mb2de3 1.38 x 1.18 (35.0 x 30.0) 38.0 33.0 5.5 6.2 15 000.0 80d153p025ke2de3 1.18 x 1.97 (30.0 x 50.0) 36.0 32.0 5.7 6.1 22 000.0 80d223p025me2de3 1.38 x 1.97 (35.0 x 50.0) 19.0 17.0 9.1 10.0 2 holes 0.079 [2.0] dia. 0.394 [10.0] 0.250 [6.3] pvc sleeve insulating disc 0.394 [10.0] style d
80d www.vishay.com vishay sprague revision: 29-aug-11 3 document number: 42060 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 35 wv dc at + 85 c, surge = 44 v 6800.0 80d682p035kc2de3 1.18 x 1.38 (30.0 x 35.0) 60.0 51.0 3.8 4.2 10 000.0 80d103p035mc2de3 1.38 x 1.38 (35.0 x 35.0) 33.0 27.0 6.2 7.2 12 000.0 80d123p035ke2de3 1.18 x 1.97 (30.0 x 50.0) 33.0 27.0 6.2 7.2 15 000.0 80d153p035me2de3 1.38 x 1.97 (35.0 x 50.0) 20.0 17.0 8.8 10.0 50 wv dc at + 85 c, surge = 63 v 3300.0 80d332p050jd2de3 0.984 x 1.57 (25.0 x 40.0) 57.0 42.0 3.9 4.9 3300.0 80d332p050kb2de3 1.18 x 1.18 (30.0 x 30.0) 79.0 63.0 3.1 3.6 4700.0 80d472p050kd2de3 1.18 x 1.57 (30.0 x 40.0) 51.0 41.0 4.3 4.9 6800.0 80d682p050ke2de3 1.18 x 1.97 (30.0 x 50.0) 40.0 32.0 5.3 6.1 63 wv dc at + 85 c, surge = 79 v 1500.0 80d152p063jb2de3 0.984 x 1.18 (25.0 x 30.0) 82.0 55.0 2.8 3.8 2200.0 80d222p063kb2de3 1.18 x 1.18 (30.0 x 30.0) 72.0 54.0 3.2 3.9 3300.0 80d332p063mb2de3 1.38 x 1.18 (35.0 x 30.0) 40.0 28.0 5.0 6.6 4700.0 80d472p063ke2de3 1.18 x 1.97 (30.0 x 50.0) 36.0 28.0 5.4 6.4 6800.0 80d682p063me2de3 1.38 x 1.97 (35.0 x 50.0) 21.0 15.0 8.3 10.0 100 wv dc at + 85 c, surge = 125 v 680.0 80d681p100jb2de3 0.984 x 1.18 (25.0 x 30.0) 139.0 85.0 2.2 3.5 1000.0 80d102p100kb2de3 1.18 x 1.18 (30.0 x 30.0) 111.0 74.0 2.7 3.7 1500.0 80d152p100je2de3 0.984 x 1.97 (25.0 x 50.0) 68.0 42.0 3.9 5.9 2200.0 80d222p100ke2de3 1.18 x 1.97 (30.0 x 50.0) 55.0 37.0 4.7 6.2 3300.0 80d332p100me2de3 1.38 x 1.97 (35.0 x 50.0) 50.0 37.0 5.2 6.2 200 wv dc at + 85 c, surge = 250 v 150.0 80d151p200ja2de3 0.984 x 0.984 (25.0 x 25.0) 660.0 375.0 1.3 3.2 220.0 80d221p200ka2de3 1.18 x 0.984 (30.0 x 25.0) 460.0 272.0 1.7 3.6 330.0 80d331p200kc2de3 1.18 x 1.38 (30.0 x 35.0) 278.0 165.0 2.4 4.9 470.0 80d471p200kd2de3 1.18 x 1.57 (30.0 x 40.0) 220.0 131.0 2.8 5.7 680.0 80d681p200kd2de3 1.18 x 1.57 (30.0 x 40.0) 248.0 127.0 2.1 4.7 820.0 80d821p200me2de3 1.38 x 1.97 (35.0 x 50.0) 130.0 82.0 4.3 7.4 1000.0 80d102p200me2de3 1.38 x 1.97 (35.0 x 50.0) 144.0 81.0 3.4 6.6 1200.0 80d122p200me2de3 1.38 x 1.97 (35.0 x 50.0) 141.0 75.0 3.4 6.6 250 wv dc at + 85 c, surge = 300 v 100.0 80d101p250ja2de3 0.984 x 0.984 (25.0 x 25.0) 720.0 377.0 1.1 3.2 150.0 80d151p250jb2de3 0.984 x 1.18 (25.0 x 30.0) 541.0 284.0 1.4 3.8 220.0 80d221p250jd2de3 0.984 x 1.57 (25.0 x 40.0) 343.0 182.0 2.0 5.2 330.0 80d331p250je2de3 0.984 x 1.97 (25.0 x 50.0) 263.0 140.0 2.5 6.3 470.0 80d471p250ke2de3 1.18 x 1.97 (30.0 x 50.0) 185.0 101.0 3.2 7.0 680.0 80d681p250me2de3 1.38 x 1.97 (35.0 x 50.0) 191.0 81.0 4.0 7.4 electrical data and ordering information capacitance (f) part number nominal case size d x l max. esr (m ? ) max. ripple at + 85 c (a) 120 hz 10 khz to 40 khz 120 hz 10 khz to 40 khz
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
